HDIUK
63A 3-Phase Plug to 32A CEE 5-Pin Coupler Converter Auxiliary Cable
- SKU:
- 5061040454883
- UPC:
- 5061040454883
Based on UK time (GMT/BST).
Orders ship Mon–Fri before 4pm.
Public holidays and weekends excluded.
Royal Mail may deliver on Saturdays depending on local service and access.
Some items may require additional processing time.
Description
This 63A to 32A 3-phase auxiliary converter cable is made for temporary power adaptation where a 63A 3-phase supply needs to feed 32A CEE 5-pin equipment quickly and reliably.
Built using 5G4 Titanex H07RN-F heavy-duty rubber cable and an IP67 plug-to-coupler connector set, it’s ideal for events, site power, industrial setups, and non-permanent installations.
Use case: When you arrive on site and there are no 32 Amp outlets available but there is a 63A Outlet vacatn. This converter allows you to siply use the 63A outlet and run your 32A machine. This is an auxiliary device and not intended to be used for permanent non attended use. This simply provides you with a quick reliable solution to your power connection needs. A tool for the box.
Key Features
- Input: 63A CEE 3-Phase Plug (5-pin)
- Output: 32A CEE 3-Phase Coupler / Socket (5-pin)
- Cable: 5G4 Titanex H07RN-F (rubber, flexible, tough)
- Ingress Protection: IP67 connectors (when mated correctly)
- Use type: Auxiliary / adapter cable for temporary use
Important Safety Notes
NO MCB / RCBO / RCD is built into this adapter cable.
Any protection must be provided upstream by the supply or distribution equipment.
- Do not exceed 32A on the 32A side.
- For temporary / supervised use only (not permanent fixed wiring).
- Always verify correct phase/earth wiring and adequate upstream protection before use.
Typical Applications
- Event and stage power distribution
- Temporary site power setups
- Distro / generator adaptation
- Workshops and industrial environments
FAQs
Can I use this 63A to 32A 3-phase adapter cable as a permanent fixed installation on site?
No. This is an auxiliary adapter cable intended for temporary, non-permanent use. For permanent installs you should use correctly designed fixed wiring and protected distribution equipment.
Does this converter cable include an MCB/RCBO, or must protection be provided upstream at source?
It does not include an MCB/RCBO. You must have suitable upstream protection (overcurrent and earth-fault protection where required) provided by the supply/distro.
What cable is used in this adapter, and is 5G4 Titanex H07RN-F suitable for tough outdoor work?
This uses 5G4 Titanex H07RN-F, a heavy-duty rubber cable commonly used for demanding environments. It’s flexible, robust, and well suited to site/event use.
Will an IP67 63A plug and 32A coupler handle rain and site conditions without water ingress?
The connectors are IP67 rated when mated correctly and the seals are clean and undamaged. Always fully engage and lock the connection, and avoid leaving unmated connectors exposed to water.
Is it safe to connect a 32A 5-pin plug into a 63A 3-phase supply using this adapter cable?
Yes, provided the load is limited to 32A and suitable upstream protection is in place. This adapter changes the connector format; it does not add protective devices.
What should I check on the supply or distro before using a 63A to 32A 3-phase adapter cable?
Confirm the supply is correctly wired (including earth), that overcurrent protection is appropriate, and that any required RCD/RCBO protection is provided upstream for the application.
HDIUK Limited Disclaimer: This auxiliary adapter is supplied for temporary use by competent persons. Ensure upstream protection is correctly specified and do not exceed the rated current of the 32A side.
Related Products
Related Products
3-Phase to Single Phase 32A 5-Pin Red Plug to 230v Coupler
HDIUK
3-Phase to Single Phase 32A 5-Pin Red Plug to 16A 230v Coupler
HDIUK
32A Plug to 16A Blue CEE Coupler Cable 230 Volts
HDIUK
3-Phase 5-Pin Plug to 4-Pin Convertion Cables 32 Amp
HDIUK
EV Type 2 22KW to 32A 415V 3-Phase CEE 3-Phase AC Converter
HDIUK