32 Amp CEE 110v Plug to Nema 5-15 US Socket Converter

Power US devices safely from 110 V site supplies. The HDIUK 110V 32A CEE Plug to NEMA 5-15 Converter allows you to connect American-standard tools, chargers and lighting systems directly to UK 110 V site power. Built in the UK with 3G4.0 mm² Arctic-grade flex and a rugged NEMA 5-15 trailing socket, it’s ideal for construction, generators and stage setups on 110 V Site Service installations.

What the 110 Volts 32 Amps CEE Plug to NEMA 5-15 (USA) Socket Converter does

Many UK job sites and generators supply power via 32 A CEE (yellow) connectors. This converter adapts that industrial feed to a standard NEMA 5-15 socket so you can run US-market equipment safely at 110 V. The tough Arctic-grade cable remains flexible in cold weather and withstands demanding site conditions.

If you need a smaller setup, check the HDIUK 110V 16A CEE Plug to NEMA 5-15 Converter for lighter loads or compact transformers.

Key features

• Input: 32 A 110 V CEE plug (yellow 2P+E) – standard on UK sites and generators
• Output: NEMA 5-15 trailing socket (15 A, 125 V nominal)
• Cable: 3G4.0 mm² Arctic-grade PVC flex in high-visibility yellow
• Build: Professionally assembled and electrically tested in the UK by HDIUK Ltd
• Use cases: US tools, AV gear, chargers and lighting rated for 110 V operation

Important safety notes

• Voltage: For 110 V yellow CEE supplies only. Do not connect to 230 V blue CEE outlets.
• Current: The plug supports 32 A but the NEMA socket is limited to 15 A (12 A continuous recommended).
• Protection: No internal MCB or RCD – use with protected site transformers or generators.
• Compatibility: Only for devices rated 110–120 V with NEMA 5-15 plugs.

Recommended accessories

For longer cable runs, pair your 110V 32A CEE Plug to NEMA 5-15 Converter with our heavy-duty 110 V 32 A CEE Extension Lead, built from the same 4 mm² Arctic cable. If you also need extra reach on the US socket side, use the HDIUK North American NEMA Extension Lead for safe grounded extension between converter and device.

Typical applications

The 110V 32A CEE Plug to NEMA 5-15 Converter is perfect for construction sites, film sets and workshops where US-spec equipment needs a reliable 110 V feed. Power imported chargers, lighting, soldering stations or AV gear within the 15 A socket limit.

Specifications

How to use the converter

1. Confirm your supply is 110 V yellow CEE with RCD/MCB protection.
2. Insert the 32 A plug securely into the socket outlet.
3. Connect a 110–120 V NEMA 5-15 plug device (max 15 A load).
4. Keep connections dry and avoid strain on the trailing socket.
5. Disconnect device first before unplugging the CEE plug.

HDIUK Ltd Disclaimer: The HDIUK 110V 32A CEE Plug to NEMA 5-15 Converter is intended for competent users familiar with site power systems. Ensure voltage and circuit protection are correct before use. The socket rating limits current to 15 A maximum. HDIUK Ltd accepts no liability for operation outside these parameters. All trademarks are the property of their respective owners.